The filling machine "MF-PA-RC-02" is designed for repackaging bulk materials (cement, gypsum, alabaster, chalk, etc.) from big bags (MKR) into consumer packaging - valve bags according to GOST 2226. The unit is a dispenser with an automatic, electromechanical system for dosing bulk materials into valve bags of different sizes (with the same valve), combined with a big-bag unloader (MKR). The operator sets the required dose weight on the control panel, places the big bag (MKR) on the unloader peak, puts the bag on the loading nozzle and mechanically clamps (base) the bag. After pressing the "START" button located on the control panel, the filling process starts. Filling stops automatically when the required dose in the bag is reached. After that, the operator releases the bag from the clamp and removes the bag from the spout. The product is filled into the container using a solid metal auger. The weight is measured using a strain gauge (located on the spout), the signal from which comes to the control unit. For precise dosing, the machine is equipped with a frequency converter. The standard size of the loading spout is 63 mm. (valve 11), it can be changed depending on the Customer's tasks. The basic configuration includes 2 filling units. "MF-PA-RC-02" should be installed in a room equipped with power wiring, a distribution board, a protective ground loop, a ventilation system, and a level floor.